Illuminated Jewelry Light Info & Care Instruction
To Activate Light
(Earrings and Glasses Chains)- Twist off the top of light fixture.
(Lapel Pins)- Stand Lamp up on table and face the lamp shade upwards. Unscrew the light part by twisting the shade. Be careful, the batteries and light can fall out.
Remove the small paper disc covering the batteries.
Screw the base back on — the light will turn on automatically.
Be mindful not to lose any interior parts of the light. If anything is removed- including the foam disc or plastic battery wrapping, the light will not function properly.
Mini LED Light
Battery-powered and long-lasting
Over 30 hours of use.
Replaceable batteries: 3 x 1.5V LR41. Batteries stacked together in 3’s work best. LR41 batteries may be known under various labels like AG3, 392, 192, LR736, V3GA (Energizer code), CX42, and SR41W, making replacements easier but also confusing.
Silver oxide twin: The same 7.9 mm × 3.6 mm size is used by the SR41 (silver-oxide) battery, which delivers ~1.55V and longer life. SR41 and LR41 look alike, but SR41 lasts longer in precision devices.
Lights shine brightly when first turned on; may dim over time. To restore brightness, turn them off for a few minutes, then back on.
In case of loss or damage to lighting elements- replacement parts available HERE
For Storage
Loosen the base slightly to disconnect power.
Save the paper disc to reinsert during storage to prevent accidental lighting..
For Lapel Pin
The lapel pin attaches to clothing using a strong Neodymium Magnet.
Be very careful when handling Neodymium Magnets. They are very strong and fragile. They can be hard to pull apart and can snap together quickly and forcefully. This can cause the magnets to break and send pieces flying. Do not set the magnet and the lamp base next to each other on a table. Either keep them far a part, or together at all times.
Jewelry Care
Fringe or other dangly bits may need to be fluffed or straightened before use.
Store in a jewelry box or pouch to avoid scratches and damage.